13.2 The F Distribution and the F-Ratio - Introductory Statistics 2e

The distribution used for the hypothesis test is a new one. It is called the F distribution, named after Sir Ronald Fisher, an English statistician. The F statistic is a ratio (a fraction). There are two sets of degrees of freedom; one for the numerator and one for the denominator.

For example, if F follows an F distribution and the number of degrees of freedom for the numerator is four, and the number of degrees of freedom for the denominator is ten, then F ~ F_4,10.

NOTE

The F distribution is derived from the Student's t-distribution. The values of the F distribution are squares of the corresponding values of the t-distribution. One-Way ANOVA expands the t-test for comparing more than two groups. The scope of that derivation is beyond the level of this course. It is preferable to use ANOVA when there are more than two groups instead of performing pairwise t-tests because performing multiple tests introduces the likelihood of making a Type 1 error.

To calculate the F ratio, two estimates of the variance are made.

Variance between samples: An estimate of σ² that is the variance of the sample means multiplied by n (when the sample sizes are the same.). If the samples are different sizes, the variance between samples is weighted to account for the different sample sizes. The variance is also called variation due to treatment or explained variation.
Variance within samples: An estimate of σ² that is the average of the sample variances (also known as a pooled variance). When the sample sizes are different, the variance within samples is weighted. The variance is also called the variation due to error or unexplained variation.

SS_between = the sum of squares that represents the variation among the different samples
SS_within = the sum of squares that represents the variation within samples that is due to chance.

To find a "sum of squares" means to add together squared quantities that, in somecases, may be weighted. We used sum of squares to calculate the sample variance andthe sample standard deviation in Descriptive Statistics.

MS means "mean square." MS_between is the variance between groups, and MS_within is the variance within groups.

Calculation of Sum of Squares and Mean Square

k = the number of different groups
n_j = the size of the j^th group
s_j = the sum of the values in the j^th group
n = total number of all the values combined (totalsamplesize: ∑n_j)
x = one value: ∑x = ∑s_j
Sum of squares of all values from every group combined: ∑x²
Between group variability: SS_total = ∑x² – $\frac{(\sum x^{2})}{n}$
Total sum of squares: ∑x² – $\frac{{(\sum x)}^{2}}{n}$
Explained variation: sum of squares representing variation among the different samples: SS_between = $\sum [\frac{{(s_{j})}^{2}}{n_{j}}] - \frac{{(\sum s_{j})}^{2}}{n}$
Unexplained variation: sum of squares representing variation within samples due to chance: $S S_{within} = S S_{total} - S S_{between}$
df's for different groups (df's for the numerator): df = k – 1
Equation for errors within samples (df's for the denominator): df_within = n – k
Mean square (variance estimate) explained by the different groups: MS_between = $\frac{S S_{between}}{d f_{between}}$
Mean square (variance estimate) that is due to chance (unexplained): MS_within = $\frac{S S_{within}}{d f_{within}}$

MS_between and MS_within can be written as follows:

$M S_{between} = \frac{S S_{between}}{d f_{between}} = \frac{S S_{between}}{k - 1}$
$M S_{w i t h i n} = \frac{S S_{w i t h i n}}{d f_{w i t h i n}} = \frac{S S_{w i t h i n}}{n - k}$

The one-way ANOVA test depends on the fact that MS_between can be influenced by population differences among means of the several groups. Since MS_within compares values of each group to its own group mean, the fact that group means might be different does not affect MS_within.

The null hypothesis says that all groups are samples from populations having the same normal distribution. The alternate hypothesis says that at least two of the sample groups come from populations with different normal distributions. If the null hypothesis is true, MS_between and MS_within should both estimate the same value.

NOTE

The null hypothesis says that all the group population means are equal. The hypothesis of equal means implies that the populations have the same normal distribution, because it is assumed that the populations are normal and that they have equal variances.

Source of Variation	Sum of Squares (SS)	Degrees of Freedom (df)	Mean Square (MS)	F
Factor (Between)	SS(Factor)	k – 1	MS(Factor) = SS(Factor)/(k – 1)	F = MS(Factor)/MS(Error)
Error (Within)	SS(Error)	n – k	MS(Error) = SS(Error)/(n – k)
Total	SS(Total)	n – 1

Example 13.1

Three different diet plans are to be tested for mean weight loss. The entries in the table are the weight losses for the different plans. The one-way ANOVA results are shown in Table 13.2.

Plan 1: n₁ = 4	Plan 2: n₂ = 3	Plan 3: n₃ = 3
5	3.5	8
4.5	7	4
4		3.5
3	4.5

Table 13.2

s₁ = 16.5, s₂ =15, s₃ = 15.5

Using the TI-83, 83+, 84, 84+ Calculator

One-Way ANOVA Table: The formulas for SS(Total), SS(Factor) = SS(Between) and SS(Error) = SS(Within) as shown previously. The same information is provided by the TI calculator hypothesis test function ANOVA in STAT TESTS (syntax is ANOVA(L1, L2, L3) where L1, L2, L3 have the data from Plan 1, Plan 2, Plan 3 respectively).

Source of Variation	Sum of Squares (SS)	Degrees of Freedom (df)	Mean Square (MS)	F
Factor (Between)	SS(Factor) = SS(Between) = 2.2458	k – 1 = 3 groups – 1 = 2	MS(Factor) = SS(Factor)/(k – 1) = 2.2458/2 = 1.1229	F = MS(Factor)/MS(Error) = 1.1229/2.9792 = 0.3769
Error (Within)	SS(Error) = SS(Within) = 20.8542	n – k = 10 total data – 3 groups = 7	MS(Error) = SS(Error)/(n – k) = 20.8542/7 = 2.9792
Total	SS(Total) = 2.2458 + 20.8542 = 23.1	n – 1 = 10 total data – 1 = 9

Table 13.3

Try It 13.1

As part of an experiment to see how different types of soil cover would affect slicing tomato production, Marist College students grew tomato plants under different soil cover conditions. Groups of three plants each had one of the following treatments

bare soil
a commercial ground cover
black plastic
straw
compost

All plants grew under the same conditions and were the same variety. Students recorded the weight (in grams) of tomatoes produced by each of the n = 15 plants:

Bare: n₁ = 3	Ground Cover: n₂ = 3	Plastic: n₃ = 3	Straw: n₄ = 3	Compost: n₅ = 3
2,625	5,348	6,583	7,285	6,277
2,997	5,682	8,560	6,897	7,818
4,915	5,482	3,830	9,230	8,677

Table 13.4

Create the one-way ANOVA table.

The one-way ANOVA hypothesis test is always right-tailed because larger F-values are way out in the right tail of the F-distribution curve and tend to make us reject H₀.

Notation

The notation for the F distribution is F ~ F_{df(num),df(denom)}

where df(num) = df_between and df(denom) = df_within

The mean for the F distribution is $μ = \frac{d f (d e n o m)}{d f (d e n o m) - 2}$

13.2 The F Distribution and the F-Ratio - Introductory Statistics 2e | OpenStax (2024)

Notation